Docs
Build the helmet, wire and calibrate it, place the coils, run blinded sessions, and look up every signal, program and protocol detail.
Start here
Build it
- Parts listEvery part of the helmet with quantities and notes.
- WiringSchematic, coil leads, pin tables for each supported board, the arming switch and cable pair mapping.
- CalibrationBench test of the module, wiring checks, and measuring µT per mA with a phone.
- Touchscreen boardRunning the helmet from the 2.8" display board without phone or computer: flashing, the SD-card program pack, clock and screens.
Use it
- Coil placementThe 10-10 system, finding sites with a tape measure, the standard and program-specific layouts, depth and field per target.
- ExperimentsBlinded real and sham sessions, remote-viewing and telepathy protocols, and the statistics behind the results table.
- Guided sessionsThe guided-session format, the audio engine and how guides arm the helmet.
- QuestionnairesThe questionnaires used in guides, their sources, licences and scoring.
Reference
- SignalsWhat the coils play: coil physics and exposure limits, the Persinger-lab signals rebuilt from primary sources, vendor signal families and clinical timings.
- Program referenceEvery program the helmet can run, generated from the same files the helmet runs: phases, signals, coils, evidence level and sources.
- Program file formatThe program file format, every signal and coil mode, the pulse-table generators and the preset checker.
- Brain viewHow the field map on the brain is computed, how accurate it is, and the data and licences behind it.
- Device protocolThe Bluetooth service, packet framing, the USB line protocol, every operation, session JSON and the trial commitment.